CiMa-Pak
[email protected]
1-877-631-2462

FP8000CS Fully Automatic L-Bar with Center Seal

The FP8000CS provides higher outputs as well as the possibility of using Polyethylene film, besides the traditional shrink films. It can be supplied with or without the T650 Tunnel.

Output of 600-1800 packs/hour Sealing bar: 860 x 670 mm Maximum pack height: 250 mm Optional kissing conveyer system Motorized center seal system Teflon-coated sealing blade Continuous cycle sealing Alphanumeric LCD control panel with microprocessor and solid state relays This system allows a simple and precise control of all the machine operations, such as:

  • storing of up to 10 different operation programs
  • automatic control of the sealing bar height
  • double adjustment of the sealing blade temperature, both length and width
  • possibility of packing single packs or multipacks
  • speed of conveyors electronically adjustable from the control panel
  • process statistics:
  • piece counter
  • measurement of the pack length
  • real-time output
  • machine performance
  • control of irregular packs Film that can be used: Polyolefins and Polyethylene Reduced power consumption modular power section made up of:
  • power card (Power Base)
  • 4 independent inverter cards
  • 2 IN/OUT (inlet/outlet) control modules

Do you need help choosing a tray sealer?
Guide me

Options

  • Shrink Tunnel
  • Eye mark reader for printed film
  • In-flow and out-flow photocells
  • Kissing belt conveyor

Specifications

  • Maximum product height: 9.8"
  • Sealbar dimensions: *33.8" x 26"
  • Output: up to 30 wraps/ minute
  • Voltage: 220V
  • Machine dimensions: 99" x 64" x 65"
  • Weight: 1584 lbs *On products reaching maximum size samples are required for testing.