Unica 25 Semi-Automatic MAP Tray Sealer
The Unica 25 is designed for businesses looking to start up or ramp up their existing tray sealing production to a medium level of output. At the same time affording them the ability to seal larger tray styles for catering and family sized meals and portions. Largest tray size is 370 x 280 x 115mm (14.5 x 11 x 4.5”)
The tray sealer allows production to switch from one tray style to another with its easy and rapid tool change system, which is unavailable on smaller units. No tools required.
The Unica 25 is impressively built in stainless steel and aluminum, allowing for easy cleaning and up keep of the unit. It comes standard with a vacuum pump that is 25m³
CiMa-Pak Trays Tooling Set Up 3 Trays Per Cycle – 1171 Series, 2182 Series 2 Trays Per Cycle – 2171 Series, 2187 Series, 2200 Series, 2202 Series, 2208 Series, 2220 Series 1 Tray Per Cycle – 2227 Series, 2290 Series, 2325 Series
Typical Applications
- Meal-filled trays are placed into the drawer
- The operator pushes the drawer into the closed position, thus beginning the automatic cycle
- The preset vacuum (as selected) is pulled
- A gas is injected (if selected) to the preset level
- The tray is then sealed and the film is diecut to the shape of the tray
- The cycle is complete and the operator will then pull open the drawer
Options
- Silent compressed air generator held internally in the unit’s lower chamber
- Additional moulds
- 40 m3/h pump
- 60 m3/h pump
Specifications
- Machine dimensions: 38.5 x 22 x 57 inches (980 x 560 x 1450mm)
- Weight: 357 lbs (162kg)
- Max tray height: 4.5 inches (115mm)
- Max top film diameter: 9.8 inches (250mm )
- Compressed Air required
- Vacuum Pump: 25 m3/h standard
- Power Supply: 220V single phase
- Power Consumption: 2100W
- Cycle Time:
- MAP: 2 cycles per minute
- Seal Only: 3-4 cycles per minute
