See our Semi-Automatic tray sealers

The CiMotion is truly a tray sealing system like no other. Do not let its small size fool you. The CiMotion is made in Canada and is designed to seal meal trays and can be placed even in the smallest of facilities. The CiMotion runs on 110V, which adds to its versatility. But the real feature that puts our CiMotion into its' own category is the fact that it has Gas Flush capabilities.

All controls are located at the front of the CiMotion and the touch panel provides easy access to the sealing parameters, take-away food tray selection, and tool change. Our temperature controller individually controls the temperature of each sealing element thus creating the optimal sealing environment.

The real beauty of the CiMotion is the turntable operation. While one meal tray is being sealed another new tray is being loaded onto the turntable which is then rotated into the sealing chamber. This feature allows one operator as close to continuous operation as possible.

Tool changes from one tray style to another are quick and easy. Convenient access from the front allows the operator to make the switch in less than 5 minutes.

Trays that work with our CiMotion:

Rectangular: 1171 - 2171 - 2187 - 2200 - 2220 - 2208 - 2227 Circular: 0080 - 0095 - 0123 - 0124 - 0126 - 0160 Special: 0503 - 1085 - 2182 - CP4S

Incorporated safety features:

• Low compressed air supply alert
• Easily accessible power switch and E-Stop
• 2 button operation assures that operator’s hands are safe
• Position detector to ensure proper mould position before sealing
• Tamper proof panel/cover detector

The P-SG 420 GF is the optimal table top tray sealing unit for small to medium productions where gas flush packaging is being used to increase the shelf life of your product. The small foot print of the unit allows for it to be placed easily within production facilities and test kitchens.

The unit is built in stainless steel, with a Teflon coated sealing plate.

*Seal Only or Gas Flush

CiMa-Pak Stock Tray Tooling Set Up for diecut tray sealing. 3 Trays Per Cycle – 1171 Series, 2202 Series 2 Trays Per Cycle – 2171 Series, 2187 Series, 2200 Series, 2208 Series, 2220 Series 1 Tray Per Cycle – 2227 Series

Electrical version also available

This semi-automatic tray sealing machine is a tabletop model with die cut features. Very compact, the RAPIDA PLUS is a drawer style food tray sealer that seals and cuts the film around the food tray with a pneumatic piston. As you push in the drawer holding your meal-filled trays, the sealing film is automatically drawn over the trays and the machine does the rest of the sealing for you. When you remove the tray, peel away the excess film that has been die cut around the contour of the tray. This machine is designed to ensure that each compartment of the tray is sealed separately to ensure that no food is redistributed during delivery.

Many sealing frames (sealing moulds) are available with the RAPIDA PLUS, giving this tray sealing machine the versatility to seal meals of all shapes and sizes. Each mould can be purchased separately to fit with the trays you wish to seal. The temperature and sealing time are regulated to allow for the sealing of different types of film and trays.

Ideal for:

• Kosher meals (ask about our double packaging)
• Salads or vegetable combinations
• Prepared meal packaging for display in grocery or specialty stores
• Catering and buffet meal packaging
• Bulk packaging of food items such as pizzas, waffle dough, etc.
• Retail packaging

• Reheat prepared meals sealed in CPET food trays in the microwave or regular oven.

A compact tabletop machine for MAP packaging with particular attention to hygiene and safety. The CiMap 2 can be precisely adjusted for vacuum and gas percentage. The machine is extremely user-friendly. The drawer is installed on special guides that grant a smooth and comfortable movement. To change from one tray style to another is very easy and accessible through the front panel.

Set the parameters for the sealing/vacuum/gas process for the trays through the front control panel. Once the parameters have been set all that remains to be done is to put the tray(s) into the drawer and then close the drawer. The process begins and once it is over all that remains to be done is to open the door remove the trays and repeat.

The SVR is a semi-automatic vacuum/MAP sealing machine for preformed trays in PP, PS, PET, AL, ect.

Important features to consider:

• Teflon coated sealing plate
• Profile cutting to the tray size
• Digital temperature controller with PT 100 probe
• 10 storable programs
• Structure made of stainless steel, aluminum and polythene
• Fast tool change
• Moulds made on tray samples for any shape

The SVR Turn is truly a most remarkable vacuum tray sealing machine. This semi-automatic modified atmosphere packaging (MAP) system is unique in the fact that the tooling where the trays sit rotates into the MAP vacuum/seal area. While one tray is being vacuum packaged the other tray is being removed and replaced with a new tray to be packaged. This process therefore speeds up your production.

As an added benefit, if you are currently using our standard SVR MAP Tray Sealer or our Easy MAP Tray Sealer the tooling is interchangeable. And, if you start with the SVR Turn you can always move the tooling to an Easy MAP Tray Sealer.

Features:

• Semi automatic vacuum/MAP sealing machine for preformed trays in PP, PE, PS, PET, AL etc. with manual rotary table that allows to load and unload trays while the machine performs the cycle
• Pressure sensor for vacuum and gas
• Teflon coated sealing plate
• Profile cutting to the tray size
• Digital temperature controller with PT 100 probe
• 10 storable programs (possibility to set sealing, vacuum, gas)
• Structure in stainless steel, aluminium and polythene
• Moulds made on tray samples for any shape
• Fast tool change

Features

• Stainless Steel construction
• Digital Vacuum gauge
• Digital Control Panel with 25 programs
• Vacuum by percentage or time
• Automatic lowering of the hood
• Vacuum pump: 25m³ / h
• Capacity for 8 trays in one cycle (Depending on your tray selection)
• Film Width: 17" (430mm)
• Die-Cut

Maximum Tray Dimensions: 1 Tray - 21" x 14.8" x 4" (537 x 375 x 100 mm) 2 Trays - 10" x 7" x 4" (256 x 175 x 100 mm) 4 Trays - 6.3" x 4.3" x 4" (162.3 x 108.3 x 100 mm) 8 Trays - TBD